By connecting your Student Information System (SIS) to Education Perfect (EP) via Wonde, teachers benefit from seamless, automated class and student enrolment.
This guide is for School Administrators setting up the Wonde integration.
Before you begin
With the Wonde integration, data from your SIS becomes the source of truth for class and user information in EP.
Wonde supports many SIS across ANZ. Check the list of supported SIS to confirm yours is compatible.
Wonde setup stages
Setting up the Wonde integration has six stages:
Expression of interest: You request a Wonde integration to opt in.
Connection request: EP sends a connection request for your school to review and approve.
Approval: Your school accepts the connection request, connects Wonde to your SIS, and sets any access controls.
Wonde audit: Wonde audits your school data.
EP audit: EP audits your school data and enables the integration, matching any existing classes in EP against the data in Wonde to avoid duplicates.
Class configuration: A School Administrator configures and syncs classes.
Setup is usually complete within 3 business days, from start to finish.
Who does what
Your school: Requests the integration, approves the connection, connects Wonde to your SIS, sets access controls, and configures and syncs classes.
EP: Sends your connection request, audits your school data, enables the integration, and matches any existing classes to avoid duplicates. Our Support Team contacts you to confirm the integration is ready.
Wonde: Emails your invitation to create a Wonde account and audits your school data.
Request a Wonde integration
Choose one of the ways below to request a Wonde integration. Once EP has sent your connection request, Wonde will email an invitation to create your school’s account to your IT contact. When it arrives, move on to connecting to Education Perfect in Wonde.
Submit the registration form
Check the list of supported SIS before you submit the form, to make sure yours is compatible.
Here’s how:
Go to the Wonde registration form on our website.
Click I’m the IT contact and will handle the Wonde setup myself, or I’d like to nominate our IT contact to handle the Wonde setup.
Enter the IT contact email address. This should be the person who manages your school’s SIS or IT systems (you or your nominee), as they’ll receive the Wonde connection request and complete the setup.
Click Submit.
Request setup in EP
Here’s how:
While logged in to EP, click the ? button in the bottom right-hand corner to open Messenger.
Click Send us a message.
Click Request enrollment or integration setup, then click Set Up Wonde Sync.
When prompted to create a ticket, enter your school’s SIS, school name, school contact name (usually your IT contact), school contact role, and school contact details.
Submit the ticket. It goes to our Support Team for processing.
Contact Support or Wonde
Contact our Support Team.
Contact Wonde Support.
Connecting to Education Perfect in Wonde
If your school already uses Wonde for other applications, you can log in at school.wonde.com and skip to approving third-party applications once EP has sent your connection request.
Create your school’s Wonde account
After EP sends your connection request, Wonde emails an invitation to create your school’s account. Someone with the authority to approve access to school data must complete this process.
Here’s how:
Open the email and click Create Account.
In your school’s Wonde portal, confirm your school name and your authority to approve access to school data stored in your SIS. If you don’t have permission, you’ll be asked for the contact details of the person who does, and a new invitation will be emailed to them.
Fill in the remaining fields, then click Create account to activate your school’s Wonde account.
Approving third-party applications
Here’s how:
In your Wonde portal, find the EP application pending approval on the Dashboard.
Click the EP application, then click Permissions.
Read and review the requested data permissions.
Approve or decline access.
Approving sends a confirmation email to your school and EP, detailing the permissions, approver, and date and time. Declining access notifies EP.
If EP later changes its permissions or requests additional data, your school must approve it again.
If you’re unhappy with the requested permissions, contact our Support Team to discuss your concerns.
Connecting Wonde to your SIS
Skip this step if your school already uses Wonde for other applications and has integrated with your SIS.
After approving access, connect Wonde to your SIS (for example, Sentral, Synergetic, KAMAR, TASS, or iSAMS).
Click your school’s SIS to open the relevant installation guide.
Alternatively, you can book a meeting with Wonde to complete the remaining steps together.
Access Controls
Use Wonde’s Access Controls to exclude specific users.
Here’s how:
Log in to school.wonde.com.
Click Education Perfect, then click Access Controls.
Choose one of the three options for filtering users:
Allow access to all users (default): Shares all users associated with approved permissions with EP.
Include users by default (recommended): Exclude specific users from being shared with EP. All other users will be included.
Exclude users by default: Include specific users to share with EP. All other users will be excluded.
What happens next
After you’ve approved the connection and set your access controls, two stages happen before you can configure classes. Setup is usually complete within 3 business days of starting.
Wonde audits your school data.
EP audits your school data and enables the integration. Any existing classes in EP are matched against the data in Wonde to avoid duplicates.
Our Support Team will then contact you to confirm the integration is ready, and you can configure and sync your classes.
Configuring your Wonde integration in EP
Only School Administrators can configure classes to sync.
Configure classes to sync
Here’s how:
Go to Settings, then click Integrations.
On the Wonde card, click Configure to load your available classes.
Review the class list, which shows each class’s name, subject, and year level. Use the search box to find specific classes, and click View to see a class’s teachers and students in a flyout.
Use the Subscribed subject filters to narrow down the classes for review. Then include classes in your sync by toggling them on individually, or by using the Activate all for syncing toggle.
Year level and subject for each class are inferred from the data available to us via Wonde, so they may be incorrect or missing. Review them before you activate a class for syncing. You can find the subject name from Wonde under the class name on each class card. If it’s empty in Wonde, it shows as N/A.
Unsubscribed: Classes without an active subscription appear here and can’t be synced. To include them, click Edit and change the subject and year level to match an active subscription.
Incomplete: Classes that need attention because the integration couldn’t infer their subject or year level.
Click Edit to assign the correct details. To bulk edit, select multiple classes using the checkboxes on the left.
Running a sync and viewing errors
A sync creates new classes and accounts as needed for the associated teachers and students. New users are emailed a login invitation, while existing users have the class added to their account. This can take several minutes, depending on how many new classes and accounts need to be created.
Here’s how:
When you’ve finished selecting classes, click Sync classes in the upper right corner. You’ll be redirected to the main Integrations page as the sync begins.
Once the sync finishes, the Wonde card displays a status update. Click the Enrolments link to open the Enrolment History table and find the record for your sync.
If issues occurred during the sync, you’ll see an entry with the status “Issues exist”. Click the download button to get a file detailing each issue, then see our Troubleshooting your Wonde sync guide for how to resolve them.
Daily automated syncs
The Wonde integration automatically syncs data daily from Wonde to EP between 8PM and 6AM NZDT.
School Administrators can find the exact timeframe for your school’s sync by clicking the settings cog icon on the Wonde card.
To pause the automated syncs for any reason, disable the Enable automated Wonde syncs toggle in the same settings flyout.
To make sure the previous day’s SIS updates are captured, we recommend setting your SIS to Wonde sync to run before 8PM NZDT.
Pausing and Disconnecting the Wonde integration
To prevent unwanted class changes in EP at the end of the school year or during major timetable updates, we recommend School Administrators pause the automatic sync from Wonde to EP.
Here’s how:
On the Wonde card, click the settings cog icon.
Toggle off Enable automated Wonde syncs.
If your school no longer wants to use a Wonde integration for automated class and user rostering, you can disconnect it at any time from the same settings flyout.
Here’s how:
On the Wonde card, click the settings cog icon.
Click Disconnect from Wonde.
Once disconnected, all Wonde-managed classes remain active, and any further updates to those classes will need to be made manually. We advise only disconnecting if you no longer want to use the integration.
Troubleshooting and FAQ
For help resolving sync issues, see our Troubleshooting your Wonde sync guide. For more about how the integration works, see our Wonde and Education Perfect FAQ.
💡Getting help is now easier. Click the ? button in the bottom corner of your screen while logged in to Education Perfect. You can:
Search for help - ask your question, and our AI assistant will find the most relevant help articles to guide you.
Alternatively send us a message to chat directly with one of our Education Perfect support team member.






















